Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 639

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
PRI Facilities
Console Display/Instructions
Save your entry.
! 
Select .
Specify the switch type.
! 
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
Telephone Number
Use this procedure to assign a string of up to 12 digits to each PRI channel. This
string must match the number sent by the network (that is, the number provided
by the PRI service provider) to indicate the number dialed by an outside caller.
The system uses this number to route the call to the correct destination, which
means that the number assigned to each channel in the same B-channel group
must be unique. Note also that the number cannot be the same as the associated
test telephone number.
Summary: Telephone Number
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Additional Information
Press the button or function key next to
your selection.
System Manager
Hybrid/PBX, Key
Not required
Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
No digits
Up to 12 digits (any combination of 0 to 9)
No
4
4
Issue 1
February 1998
Page 4-169
PC
Ã
ÇÇ