Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 795

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
System Features
SMDR Language
Use this procedure to change the language of the SMDR reports. It applies to
Releases 1.1 and later only. The default report language is the same as that set
for the system language. See
Summary: SMDR Language
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure More
PC Procedure
SMDR Call Report Format
Use this procedure to specify whether the SMDR call reports are printed in Basic
format or ISDN format. In ISDN format, automatic number identification (ANI)
information appears in the Calling Number field in place of IN (which appears in
the Basic report format). The call recording type for these calls is I in ISDN format
and C in Basic format.
ISDN format should be used only in conjunction with automatic number
identification (ANI) or Caller ID service subscription.
Summary: SMDR Call Report Format
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
"System Language" on page 5.
System Manager
All
Not required
Form 1, System Planning
English (matches System Language setting)
English, French, Spanish
No
No
 È Å
Select language
System Manager
All
Not required
Form 8a, System Features
Basic format
Basic, ISDN
No
4
4
 Ç
Select language
4
4
Issue 1
February 1998
Page 4-325