Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 805

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
System Features
Assign Allowed Lists to Extensions
Use this procedure to assign individual extensions access to established Allowed
Lists. More than one Allowed List can be assigned to an extension.
Summary: Assign Allowed Lists to Extensions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Disallowed Lists
Use this procedure to establish Disallowed Lists. These lists are telephone
numbers that cannot be dialed from specified extensions (including unrestricted
extensions).
A maximum of 8 lists (numbered 0 through 7) with 10 entries each (numbered 0
through 9) are allowed. Each number can have a maximum of 11 digits, including
wildcards. The Pause character (entered by pressing the Hold button) is used to
designate a wildcard character, for example, to indicate that calls to a given
exchange are restricted in every area code.
!
SECURITY ALERT
Create a Disallowed List or use the pre-prepared Disallowed List number 7
(Release 3.1 and later systems only) to disallow dialing 0, 11, 10, 1700,
1809, 1900, and 976 or 1(wildcard)976. In Release 3.1 and later systems,
Disallowed List number 7 does not include 800 and 1800 and 411 and 1411,
but Lucent Technologies recommends that you add them. Assign all voice
mail port extensions to this Disallowed List. Lucent Technologies
recommends assigning Disallowed List number 7. This is an added
layer of security, in case outward restriction is inadvertently removed.
(In Release 3.1 and later systems, voice messaging ports are assigned by
default to Disallowed List number 7.)
System Manager
All
Not required
Form 6g, Call Restriction Assignments and Lists
Not applicable
0 to 7
Yes
Yes
Dial list no.
 Ä
 Ç Ç
Type list no.
:
4
4
Dial ext. no.

Type ext. no.
4
Issue 1
February 1998
Page 4-335