And Mlx-5 Nondisplay Telephones; Special Characters For Mlx-10 And Mlx-5; Nondisplay Telephones - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
H Programming Special Characters
MLX-10 and MLX-5 Nondisplay Telephones
MLX-10 and MLX-5

Nondisplay Telephones

Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H–3.
Press...
Drop
Hold
Conf
#
##

Special Characters for MLX-10 and MLX-5

Nondisplay Telephones
Means...
Stop. Halts the dialing sequence to allow for system
response.
Pause. Inserts a 1.5-second pause in the dialing sequence.
Multiple consecutive pauses are allowed.
Flash. Sends a switchhook flash. Must be the first entry in the
dialing sequence.
End of Dialing for extension programming only. Used at
the end of a dialing sequence to indicate that the user has
finished dialing or to separate one group of dialed digits from
another.
End of Dialing. Used to signal the end of the dialing
sequence or to separate one group of dialed digits from
another.
8
Issue 1
February 1998
Page H-3