Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 606

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Tie Trunks
Console Display/Instructions
Assign or remove remote dial tone.
! 
Select
Return to the System Programming menu.
! 
Select three times.
Block Procedure
Console Display/Instructions
Specify the block of 20 lines associated with the 20 buttons
! 
on the system programming console.
Select
Specify remote or local dial signaling for each block.
! 
Return to the System Programming menu.
! 
Select three times.
or
.
Additional Information
You may continue to assign or remove remote
dial tone from additional lines/trunks by repeating
Steps 2 and 3.
Additional Information
Toggle the green LED on or off as required.
On = remote dial tone
Off = local dial tone
Issue 1
February 1998
Page 4-136
PC


ÇÇÇ
PC
à Ä
Å Æ
ÇÇÇ