MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4
Common Administrative Procedures
Extensions
Console Display/Instructions
Select Maintenance Alarms.
!
Enter the line/trunk jack to which the maintenance alarm is connected.
!
%DFNVSDFH
([LW
Assign or remove the line/trunk.
!
Select
Return to the System Programming menu.
!
Select
twice.
Voice Messaging System and Automated
Attendant
Use this procedure to specify the touch-tone duration and the interval between
digits in codes sent between a voice messaging system and the communications
system. The touch-tone duration and interval between digit assignment must be
the same as those programmed on the voice messaging system.
This procedure specifies the integrated voice messaging ports (line/trunk jacks)
used to connect voice messaging systems such as MERLIN MAIL Voice
Messaging System or the AUDIX Voice Power-Integrated Solution II/III
application. It also specifies the generic VMI ports (line/trunk jacks) used for
automated attendants, such as Integrated Voice Power Automated Attendant
IS II/III.
'HOHWH
(QWHU
or
.
Additional Information
Dial or type:
OOO
Trunk number [
]
Slot and port number [ sspp ]
Logical ID number [ nnn ]
4
Issue 1
February 1998
Page 4-266
PC
Æ
Ã
ÇÇ