Telephone And Operator Features - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
D General Feature Use and Telephone Programming

Telephone and Operator Features

Feature Codes
Feature codes are 1-, 2-, and 3-digit codes that activate features. A feature code
is used by first pressing the dedicated Feature button on MLX telephones,
pressing a programmed Feature button on analog multiline telephones, or dialing
Æ
on single-line telephones. Each of these methods sends a signal to the system
that a feature code is about to be dialed. When the code is dialed, the feature is
activated.
NOTE: NOTE: NOTE:
Queued Call Console (QCC) system operators cannot use feature codes.
The following features can be used only by dialing feature codes:
Pickup
Forward/Follow Me—Cancel One
Forward/Follow Me—Cancel All
Message Cancel
Personal Speed Dial
System Speed Dial
NOTE: NOTE: NOTE:
Pressing the Conf, Transfer, Speaker, or Feature button while activating a
feature cancels the process. Pressing any other button, such as the Mute,
HFAI, Message Status, DSS Page, More, Message, Clock, analog
multiline display keys, or analog multiline disconnect button does not cancel
the feature activating process.

Telephone and Operator Features

Table D–1
telephones or consoles either through centralized telephone programming or by
users from their telephones.
lists the telephone and operator features that can be assigned to
4
4
Issue 1
February 1998
Page D-3