Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 770

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Group Features
Optional Group Features
This section contains programming summaries for the following optional features:
Pickup Groups
Group Paging
Group Coverage Member Assignments
Group Coverage Delay Interval (Release 4.0 and earlier)
Group Calling Member Assignments
Group Calling Line/Trunk or Pool Assignments
See Chapter 3, "Common Administrative Procedures," for detailed programming
information.
Pickup Groups
Use this procedure to assign or remove an extension from a call pickup group. A
pickup group consists of telephone users who can answer each other's calls
either by pressing a button or by dialing a code.
NOTES:
1. A maximum of 30 pickup groups, with a maximum of 15 extensions per
2. An extension can belong to only one group.
3. Before reassigning an extension to a new group, you must remove it
Summary: Pickup Groups
Programmable by. System Manager
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
group, is allowed.
from its current group.
All
Not required
Form 7a, Pickup Groups
Not applicable
Pickup group number, extension number
Yes
No
4
4
4
Issue 1
February 1998
Page 4-300