Facility Restriction Level - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Automatic Route Selection
Console/Display Instructions
Enter a pool dial-out code of up to 3 digits on which to route calls.
! 
YY Y
Continue to enter pool dial-out code(s) for another route or go to Step 5.
! 
Select .
Save your entry.
! 
(QWHU
Select .
Return to the System Programming menu.
! 
([LW
Select twice.

Facility Restriction Level

Use this procedure to assign a Facility Restriction Level (FRL) to each route. The
FRL ranges from 0 (least restrictive) to 6 (most restrictive) and is used to restrict
user access to the route. The FRL assigned to extensions and remote access
users is the opposite of the FRL assigned to routes, where 0 is the most restrictive
and 6 is the least restrictive.
NOTE: NOTE: NOTE:
Pool routes must be programmed before you assign Facility Restriction
Levels.
Facility Restriction Levels are assigned to Tables 1 through 18. Tables 17 and 18,
the Default Toll and Default Local tables respectively, cannot be changed.
Additional Information
xx = table number entered in Step 1
x = route number entered in Step 1
Dial or type [ nnn ].
Return to Step 3. The next route is
displayed on Line 1.
4
Issue 1
February 1998
Page 4-378
PC
Ã

ÇÇ