Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 885

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
UDP (Uniform Dial Plan) Routing
Console/Display Instructions
Continue to specify other digits for another route in the current pattern or go to
! 
Step 11.
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select four times.
UDP Voice and/or Data Routing
Use this procedure to route voice, data, or voice and data. For UDP routing, the
voice/data specification is used in conjunction with PRI tandem trunks (see "PRI
Facilities" on page 4–165 for more information). When using Fractional-T1
tandem trunks, each channel on the trunk can be used for either voice or data but
not for voice/data (see "DS1 Facilities" on page 4–87 for more information).
Voice/data routes can be associated with any UDP pattern.
Summary: UDP Voice and/or Data Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
Return to Step 8. The next route number
is displayed on Line 1.
System Manager
Hybrid/PBX
Not required
Non-Local Dial Plan Administration Form in the Installation
Specification
Voice/Data
Voice Only, Data Only, Voice/Data
No
No
Dial route no.
 É
 È
Type pattern no.
Select capability
4
4
Dial pattern no.
Select capability

 Ç Ç Ç Ç
Type route no.
Issue 1
February 1998
Page 4-415
PC


ÇÇÇÇ