Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 857

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Automatic Route Selection
Other Digits
Use this procedure to specify other (extra) digits that must be added by the
system to the beginning of the number dialed by the caller, when calls are placed
on an identified route.
NOTES:
1. Pool routes must be programmed before you assign other digits.
2. In Release 6.0 and later systems where ARS calls will be made from
A maximum of 20 digits can be added, in any combination of the digits 0
through 9.
Special characters such as switchhook flash, Stop, and # cannot be included as
extra digits. Pause is allowed in every position but the first.
Other digits are assigned to Tables 1 through 18.
Summary: Other Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure Uhiyr†
PC Procedure
lines/trunks connected to a remote networked system, the local ARS
feature adds (prepends) the ARS access code of the remote system.
System Manager
Hybrid/PBX
Not required
Form 3f, Automatic Route Selection Tables
0
Up to 20 digits (any combination of 0 to 9)
No
No
table no. and pool route no.
 È É
be added
Ç Ç
route no.
4
4
6ST TˆiÃ6Ã9vtv‡ or More and TˆiÃ79vtv‡
 Å
@‡r… @‘v‡ @‘v‡
 U

or and
+ Type digits to be added
February 1998
@‡r…
Drop Dial digits to
Type table no. and pool
Issue 1
Page 4-387
Dial