Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 789

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
System Features
One-Touch Hold applies to incoming central office calls only. When the user
presses an Auto Dial or DSS button to initiate a transfer, the outside caller is put
on hold. The system automatically selects an intercom facility and dials the
transfer destination. There is no transfer return function with this method.
Consequently, if the transfer destination does not answer or is busy, the user who
initiates the transfer must notify the outside caller, or the outside caller remains on
hold.
One-Touch Hold is the factory setting in Behind Switch mode only.
Summary: One-Touch Transfer/Hold
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To program One-Touch Transfer:
PC Procedure
System Manager
All
Not required
Form 8a, System Features
One-Touch Transfer, automatic completion (One-Touch Hold
is the factory setting in Behind Switch mode.)
Transfer, Hold
No
No
or
To program One-Touch Hold:
É Ã Ä Ã  Ã
To program One-Touch Transfer:
É Ã Ä Ä  Ç Ç
To program One-Touch Hold:
4
Ä  Ç Ç
or
Issue 1
February 1998
Page 4-319