Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 665

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
PRI Facilities
Test Telephone Number
Use this procedure to assign a test line or trunk telephone number for each 100D
module installed in the control unit.
The number assigned to the test line/trunk must be different from the numbers
assigned to other channels in the same B-channel group. It must be identical to
the number provided by the PRI service provider.
Summary: Test Telephone Number
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Test Telephone Number
Console Display/Instructions
Select the Lines and Trunks menu.
! 
System Manager
Hybrid/PBX, Key
Not required
Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
Not applicable
Telephone number of up to 12 digits
No
No
Æ È Æ
Drop Dial telephone no.
Type slot no.
Type telephone no.
Additional Information
4
4
Dial slot no.
 U
 Ç Ç
4
Issue 1
February 1998
Page 4-195
I
+
PC
Æ