Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 785

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Group Calling Features
Copy Option
Console Procedure
PC Procedure
Queue Control
In Release 6.0 and later systems, the system manager can control the maximum
number of calls allowed in the primary calling group queue for calls that arrive on
the following types of facilities:
DID (Direct Inward Dialing) and dial-in TIE
PRI facilities programmed for dial-plan routing
All calls transferred from a VMI (voice messaging interface) port
Internal calls to the DGC group
Internal calls to the calling group through the QCC Position-Busy backup
(PBB)
Intrasystem calls to the DGC group
All private network dialed calls, including remote DID
When the number of the calls in queue reaches the programmed maximum,
subsequent callers receive a busy signal.
NOTE: NOTE: NOTE:
Dial-in tie trunks, including private tandem tie trunks (Release 6.0 and later
systems, Hybrid/PBX only) cannot be assigned directly to calling groups.
Remote-access calls to a calling group, coverage calls directed to a calling group,
and all outside/CO calls are not eligible for queue control.
Queue control does not apply to calls received directly on any of the following
facilities:
Loop-start lines
Ground-start lines/trunks
Auto-in tie trunks
BRI (Basic Rate Interface) channels
T1 facilities emulating ground-start or loop-start lines/trunks
PRI facilities programmed for line-appearance routing
No
More
Type Dial calling group ext. no.
È  Æ 
type
Specify login type
More
 Ç Ç Ç
Type calling group ext. no.
4
Issue 1
February 1998
Page 4-315
Specify login