Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 593

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Tie Trunks
Console/Display Instructions
Enter the tie trunk number.
! 
Save your entry.
! 
Select .
Specify the trunk direction.
! 
YYYY
Continue to assign the direction to another trunk or go to Step 8.
! 
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
Additional Information
Dial or type:
Trunk number [ nnn ]
Slot and port number [ sspp ]
Logical ID number
If you get the Trunk Busy message, wait for an
idle condition or exit system programming and try
again later.
xxxx = trunk entered in Step 4
is used for tandem tie trunks in
R6.0 or later systems.
Select ,
, or
.
Return to Step 6. The next trunk is
displayed on Line 1.
February 1998
Page 4-123
[ nnn ]
#
Issue 1
PC
Ã

Ã
Ä
Å


ÇÇ