Special Characters - Lucent Technologies MERLIN LEGEND Release 3.1 MLX Queued Call Console Operator's Manual

Special Characters

When you program Personal Directory listings, you are storing a sequence of numbers to be dialed
automatically. Some dialing sequences need special characters. For example, you press the Hold
button to insert a pause (p) after the dial-out code in a dialing sequence. This way, the system is
allowed to seize an outside line before dialing the number. A pause can also be used to separate a
phone number from an extension number.
The following table describes special characters. Ask your system manager which special characters are
needed and when to use them.
- Special Characters
When You You
Press... See...
Drop s
Hold p
Conf f
# #
Copyright © 1996, Lucent Technologies. MERLIN LEGEND, MLX-10D, MLX-10DP, MLX-16DP, MLX-20L, MLX-28D,
and Passage Way are registered trademarks of Lucent Technologies. Mirage, StarSet, and Supra are registered trademarks
of Plantronics, Inc.
-
This
Means...
Stop. Halts dialing sequence to allow the system to respond.
Pause. Inserts 1.5-sec. pause in the dialing sequence. Multiple
consecutive pauses are allowed.
Flash. Sends switchhook flash. Must be first entry in sequence.
End of Dialing. Use to signal end of dialing sequence or to separate
grouped digits.
24