Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 758

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Optional Extension Features
Copy Option
Console Procedure
PC Procedure
Trunk-to-Trunk Transfer
Use this procedure to enable or disable trunk-to-trunk transfer at an extension.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE: NOTE: NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), calls can be
transferred to members in the non-local dial plan tables, even if trunk-to-
trunk transfer is not allowed. This allows users of single-line telephones to
transfer incoming calls from the PSTN to non-local dial plan extensions.
Summary: Trunk-to-Trunk Transfer
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
No
More
È  
Dial no. of delay rings
Type ext. no.
Type no. of delay rings
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Disabled
Enabled, Disabled
Yes
No
More
È  É
Toggle LED On/Off or dial ext. no.
 Ç Ç
Toggle letter
Dial ext. no.

 Ç Ç
4
4
More
On/Off or type ext. no.
Issue 1
February 1998
Page 4-288