CHAPTER 14
Performing the Initial T640 Junos OS
Configuration
Preparing to Configure the T640 Router
Related
Documentation
Initially Configuring the T640 Router
Copyright © 2010, Juniper Networks, Inc.
Preparing to Configure the T640 Router on page 139
Initially Configuring the T640 Router on page 139
Gather the following information before configuring the router:
Name the router will use on the network
Domain name the router will use
IP address and prefix length information for the Ethernet interface
IP address of a default router
IP address of a DNS server
Password for the root user
T640 Router Description on page 3
Powering On a DC-Powered T640 Router on page 130
Powering On a T640 Replacement Three-Input 240-A DC Power Supply on page 253
Initially Configuring the T640 Router on page 139
T640 Physical Specifications on page 341
The T640 Core Router is shipped with the Junos OS preinstalled and ready to be
configured when the T640 router is powered on. These procedures connect a router to
the network but do not enable it to forward traffic. For complete information about
enabling the router to forward traffic, including examples, see the Junos OS configuration
guides.
139