Kyocera TASKalfa 7002i Service Manual page 924

Step Check description
8 Checking the wire
9 Replacing the high-volt-
age PWB
10 Replacing the engine PWB The engine PWB is faulty.
Assumed cause
The connectors are not
properly connected or the
wire is faulty.
The high-voltage contact of
the high-voltage PWB is
deformed or damaged.
7-64
Measures
Clean the terminal of the fol-
lowing wire connectors and
reinsert the connectors.
Replace the wire when it has
no continuity. • Main high-
voltage PWB - Engine PWB
Replace the high-voltage
PWB.
Replace the engine PWB.
2WA/2NJ/2RK
Reference
Wiring dia-
gram
Detaching
and Reat-
taching the
main high-
voltage
PWB
Detaching
and Reat-
taching the
engine
PWB