Kyocera TASKalfa 7002i Service Manual page 1353

Num-
Contents
ber
F5FX Abnormality detecting in a service execution
part
F62X Abnormality detecting in a service execution
part
F63X Abnormality detecting in a device control sec-
tion
F68X Abnormality detecting in a storage device con-
trol section
F69X, Abnormality detecting in a HyPAS-E part
F6AX,
F6BX,
F6CX
Verification procedure / check point
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
Remarks
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of the
acquisition.
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of the
acquisition.
* F684 is overwritten error at operating
the HDD security kit.
7-493
* Initialize each SSD/HDD and
perform an operation check.
(SSD FULL of U024 / HDD FULL
of U024)
2WA/2NJ/2RK