Kyocera TASKalfa 7002i Service Manual page 669

U106 Secondary transfer voltage adjustment
(Message: Adjust 2nd Transfer Roller Output)
Contents
Set the secondary transfer control voltage.
Purpose
Change setting if a failure such as faint image, etc. occurs.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Light/Normal1
Normal2/3
Heavy1- 3
Heavy4/5
OHP
Bias
Execution: Light/Normal1
1.Select the item to set.
* :The screen for setting is displayed.
Items
1st
2nd
Setting: 1st
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Width=105 Setting that paper width is equal to 105
Width=210 Setting that paper width is equal to 210
Width=297 Setting that paper width is equal to 297
3.Press the [Start] key and then fix the setting value.
Transfer control value for Light and Normal1
Transfer control value for Normal 2/ 3
Transfer control value for Heavy 1 to 3
Transfer control value for Heavy 4/ 5
Transfer control value for Transparency
Bias setting
Surface transfer control value at full speed
Back side transfer control value at full speed
Contents
6-76
Contents
Contents
Setting range Data
varia-
tion
0 to 255 1
0 to 255 1
0 to 255 1
2WA/2NJ/2RK-2
Initial setting
90 80 70
ppm ppm ppm
162 154 143
158 150 140
149 142 133