Kyocera TASKalfa 7002i Service Manual page 679

U130 Developer initial setting:
(Message: Set Toner Install)
Contents
Set the toner sensor control voltage so that the sensor output value becomes the target one in
initial developer.
Purpose
Execute automatically when exchanging the developer unit which includes the initial developer.
Execution
1.Press the [Start] key.
2.Select [Execute].
3.Press the [Start] key.
* : Start the initial developer setting and display the control voltage value of toner sensor.
Items
K
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance mode No. is displayed.
Toner sensor K control voltage value
6-86
Contents
2WA/2NJ/2RK