Kyocera TASKalfa 7002i Service Manual page 552

(1-2) Detaching and reattaching the PF drive unit
Procedures
1. Remove the rear cover.
2. Remove the right cover.
3. Disconnect each the connector (a).
4. Remove each two screws (b)(M3x8)
and then remove the PF lift motor 1 (c)
and the PF lift motor 2 (d).
5. Disconnect two connectors (a).
6. Release two wire saddles (b) and
remove the wire.
c,d
a
Figure 4-340
b
b
a
Figure 4-341
4-224
2WA/2NJ/2RK
c
d
b
a
14j0524
14j0525