Kyocera TASKalfa 7002i Service Manual page 575

Parts name
PARTS CONTACT-GLASS ASSY(I)
SP
2 MIRROR A/B/C
3 LENS ISU
4 PARTS MOUNT LED ASSY SP
5 RAIL ISU R/F
6 SENSOR ORIGINAL 7NXPS181EL1MH01
7 PARTS ISU ASSY H SP
I <Drive and others>
1 CLUTCHES
2 SENSORS
Only loop sensor(SENSOR OPT.) 7NXGP2Y0A51SH01
3 IMAGE QUALITY
J <DP paper feed>
1 BELT PF
2 PULLEY LF
3 PULLEY SEPARATION
PM maintenance(x1000 counts)
Parts No
Set up User Call 600
302NH94410 CL CL
-------- CL
-------- CL
302ND93120 CH
302ND9K120 RE
-------- LU
CH
CL
302ND93110 CH
RE
-------- CH CH
RE
-------- CH CH
RE
CL CL
-------- CH CH
AD AD
303LL07531 CL RE
303M407480 CL RE
303LL07190 CL RE
1200 1800 2400 Please do not use spray containing flammable gas for air-blow or air brush purposes.
CL CL CL CL: Dry cloth or water (DP slit glass)
Clean the back side only at an image failure (streaks and dirt).
(Wipe with a dry cloth after cleaning with alcohol.)
Clean only at an image failure (streaks)
(Air blowing after wiping with a dry cloth)
Clean only at an image failure (streaks)
(Air blowing after wiping with a dry cloth)
Replace at the image failure
Apply grease only at an abnormal sound, shake, etc
Grease to the optical rail: PG-671(P/N: 60170000)
Clean with alcohol or wipe with a dry cloth only at an error (sensor transmitter and receiver
only)
Replace at the image failure
CH CH CH Check the copy registration and paper feed condition on paper feed (registration) section.
CH CH CH Wiping with a dry cloth or air blowing the receiver.
CL CL CL CL: Air blowing or dry cloth
CH CH CH U474: LSU cleaning, U464: Calibration, U410: Half tone auto adjustment
AD AD AD
RE RE RE CL: Alcohol or dry cloth (If no replacement)
CH: Performing U905 and check feeding count : Target to replace at 300K.
RE RE RE CL: Alcohol
RE RE RE CL: Alcohol
4-247
2WA/2NJ/2RK-1
Remark