Kyocera TASKalfa 7002i Service Manual page 809

U631 Communication control 2
(Message: Communication Control 2)
Contents
Sets the FAX communication.
Purpose
Sets the transmission and reception of ECM
Sets the CED frequency
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
ECM TX
ECM RX
CED Freq
Setting: ECM TX
Set to OFF when the reduction of transmission costs is of higher priority than image quality.
* :Do not set it to Off when connecting to the IP telephone line.
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key. Set the setting value.
* :Completed is displayed.
Setting: ECM RX
Set to OFF when the reduction of transmission costs is of higher priority than image quality.
* :Do not set it to OFF when connecting to the IP (Internet Protocol) telephone line.
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
Sets ECM transmission.
Sets ECM reception.
The frequency of CED is set up.
ECM transmission is enabled.
ECM transmission is disabled.
ECM reception is enabled.
ECM reception is disabled.
6-216
Contents
Contents
Contents
2WA/2NJ/2RK