Kyocera TASKalfa 7002i Service Manual page 720

U240 Finisher operation check
(Message: Check Finisher Operation)
Contents
Turn the finisher's motors and solenoids on.
Purpose
Execute for the finisher's motors and solenoids operation check.
Method
1.Press the [Start] key.
2.Select the item to operate.
* :The screen for setting is displayed.
Items
Motor
Solenoid
Mail Box
Booklet
Method: Motor
1.Select the item to operate.
2.Press the [Start] key.
* :The operation starts.
Items
Feed In(H)
Feed In(L)
Middle(H)
Middle(L)
Eject(H)
Eject(L)
Save(H)
Save(L)
Tray
Staple Move
Staple
Width Test(A3)
Width Test(LD)
Beat
Eject Unlock(HP)
Sort Test
Finisher motor operation check
Finisher solenoid operation check
Mail Box motor operation check
Booklet operation check
Drive the DF paper entry motor at a high speed.
Drive the DF paper entry motor at a low speed.
Drive the DF middle motor at a high speed.
Drive the DF middle motor at a low speed.
Drive the DF eject motor at a high speed.
Drive the DF eject motor at a low speed.
Drives the DF save drum motor at a high speed
Drives the DF save drum motor at a low speed
Drive the DF tray motor.
Operation pattern: After descending to the lower limit, ascends and
descends again when passing 1s after detecting the middle sensor off.
ascends again when detecting the middle sensor on and stops at the
upper limit.
Drive the DF slide motor.
Drive the DF staple motor.
Drive the DF side registration motor 1, 2.
Drive the DF side registration motor 1, 2.
Drive the DF paddle motor.
Drive the DF eject release motor at a home position.
Execute the DF shift operation.
6-127
Contents
Contents
2WA/2NJ/2RK