Kyocera TASKalfa 7002i Service Manual page 533

3. Remove two screws (a)(M3x8) and
remove the PF main PWB (c) from two
holders (b).
4. Check or replace the PF main PWB
(c) and then reattach the parts in the
original position.
5. After power on, port the counters on
the engine board to the PF main board
using maintenance mode U901.
(Refer P.6-237)
a
c
b
Figure 4-309
4-205
2WA/2NJ/2RK
c
b