Kyocera TASKalfa 7002i Service Manual page 580

(2-3)PF-7120
Parts name
A <Set up>
1 PAPER LINE
B <Paper feed>
1 PULLEY FEED
2 PULLEY RETARD
3 PULLEY PICKUP
4 PARTS ROLLER ASSIST SP
5 CLUTCH 50 Z35R
X2
*:If replaced at check, return to the original maintenance at the next maintenance. If not replaced at check, check again at the next maintenance.
PM maintenance (x1000 counts)
Parts No.
Set up User call
-------- CH
AD
302K906350 CH CH
2K906350 CL RE
302K906360 CH CH
2K906360 CL RE
302K906370 CH CH
2K906370 CL RE
303NG94060 CL
3NG94060
302KV44041 CH CH
2KV44041 RE
CH:Check / CL:Clean / AD:Adjust / LU:Lubrication / RE:Replace
*Based on the main
* Please do not use spray containing flammable gas for air-blow or air-brush purposes.
installation
CH: Check the image center alignment gap
(Check after the center adjustment of copier.)
CL: Alcohol or dry cloth (If no replacement)
CH: Check feeding count in simulation: Target to replace at 300K.
CL: Alcohol or dry cloth (If no replacement)
CH: Check feeding count in simulation: Target to replace at 300K.
CL: Alcohol or dry cloth (If no replacement)
CH: Check feeding count in simulation: Target to replace at 300K.
CL: Alcohol or dry cloth
CH: Check the paper feed status, abnormal sound etc.
4-252
2WA/2NJ/2RK
Remark