Kyocera TASKalfa 7002i Service Manual page 558

(2-3) Detaching and reattaching the PF lift motor
Procedures
1. Remove the rear cover.
2. Disconnect each the connector (a).
3. Remove each two screws (b)(M3x8)
and then remove the PF lift motor 1 (c)
and the PF lift motor 2 (d).
4. Check or replace the PF lift motor and
then reattach the parts in the original
position.
c
a
b
b
Figure 4-352
4-230
2WA/2NJ/2RK
d
c,d
14j0536