Kyocera TASKalfa 7002i Service Manual page 730

Setting: Finisher
1.Select the item to set.
Items
Punch Regist
Punch Feed
Punch Width *1
Width Front HP
Width Tail HP
Shift Front HP *1
Shift Tail HP *1
Staple HP
Setting: Punch Regist
1.Select [Punch Regist].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Content to adjust
Adjusting the punch registration stop timing
* :Increase the value if paper is skewed (sample 1).
Reduce the set value if paper is folded in a Z-shape (sample2).
3.Press the [Start] key to set the setting value.
Setting: Punch Feed
1.Select [Punch Feed].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Content to adjust
Adjusting the punch stop timing
* :Increase the specified value if the punch position is shorter than specified.
Reduce the specified value if the punch position is longer than specified.
3.Press the [Start] key to set the setting value.
Punch registration stop timing adjustment in the punch mode.
Punch position stop timing adjustment in the punch mode.
Punch center position timing adjustment in the punch mode.
Front width adjuster home position adjustment
Rear width adjuster home position adjustment
Adjustment of front shift home position
Adjustment of rear shift home position
Front/rear staple home position adjustment
Sample 1
A
6-137
Contents
Setting
range
-20 to 20
Sample 2
Setting
range
-10 to 10
Preset value A: 13 mm (metric)
2WA/2NJ/2RK
Data varia- Initial setting
tion
0.25mm 0
Data varia- Initial setting
tion
0.52mm 0
9.5 mm (inch)