Kyocera TASKalfa 7002i Service Manual page 772

Error codes list
Display
S001 Patch is not detected
S002 Original position shift in the main
scanning direction
S003 Original position shift in the sub-
scanning direction
S004 Original skew error
S005 Original type error
Setting: On/Off Config
1.Select the item to set.
Items
On
Off
* :Initial setting: On
* :Automatically set to on after completing correction.
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Enable the uneven density correction
Disable the uneven density correction
6-179
Display
SFFF Other scanner error
EFFF Other engine error
C001 Controller error
CFFF Other controller error
Contents
2WA/2NJ/2RK
Contents