Kyocera TASKalfa 7002i Service Manual page 442

(3-4) Detaching and reattaching the scanner wires
Precautions
When fitting the wires, be sure to use those
specified below.
Machine front side (P/N: 302H717380(gray))
Machine rear side(P/N: 302H717390(black))
Fitting requires the following tools
Two frame securing tools (P/N: 302NL1711_)
Two scanner wire stoppers (P/N: 302RH9401_)
Procedures
1. Detach the document processor. (Refer
1-4-206)
2. Remove two screws (a)(M4x8) and
remove the ISU right cover (b) in the direc-
tion of the arrow.
3. Remove two pins (a)(M4x6) and remove
the front glass cover (b) by sliding it in the
direction of the arrow.
a
Figure 4-169
b
a
Figure 4-170
4-114
2WA/2NJ/2RK
b
a
a
14j0222
14j0223