Kyocera TASKalfa 7002i Service Manual page 1431

(10)Print stops after printing several pages and locks up. Processing and Memory
lamps on operation panel are lit.
The image processing fails due to the insufficient memory, so the main unit locks up.
Step Check description
1 Checking the situation
2 Checking the settings
3 Checking the firmware
4 Deleting the job
5 Memory allocation
6 Resetting the main power
(11)Print output is unavailable due to the network factor
The network has some troubles or the network setting is incorrect.
Step Check description
1 Checking the network
Assumed cause
The data processing in a
certain PC is faulty.
The application is not prop-
erly set.
The firmware is not the lat-
est version.
Processing fails.
Memory allocation is insuf-
ficient.
The main unit locks up.
Assumed cause
There is trouble in the net-
work.
7-571
Measures
Check if the issue occurs
when printing the data from
all PCs in the network or from
a certain PC. Then, print out
the data from another PC if it
occurs at a certain PC.
Check if a problem occurring
from a certain application and
file (big data like CAD data)
and change application set-
ting and refer to application-
shelp.'
Upgrade the main firmware to
the latest version.
Cancel the job in process and
reprint in the main unit job
status
If the processing memory in
the main unit is insufficient,
set the Memory allocation by
executing U340 [Adj Mem-
ory].
If the operation panel or the
buttons are not active, turn
the power switch and the
main power switch off. After
5s passes, turn the main
power switch and the power
switch on.
Measures
Check if the memory LED on
the operation panel of the
main unit is blinking after
printing out from the PC. If
not blinking, cancel the pro-
cessing job and reprint out.
2WA/2NJ/2RK
Reference
Firmware
Update
?
U340 Exe-
cution
Reference
?