Kyocera TASKalfa 7002i Service Manual page 1377

U01191/E01191
Step Check description
1 Request for resending
2 Changing the initial value
U01193/E01193
Step Check description
1 Checking the settings
2 Checking the settings
3 Changing the transmit start
timing
U01194/E01194
Step Check description
1 Request for resending
2 Changing the initial value
Assumed cause
Communication is stopped
with error during image
data receipt sequence at
V.34.
Line condition is poor.
(Own machine)
Assumed cause
No response, DCN signal
or invalid command is
received at phase C/D dur-
ing reception.
Line condition is poor.
Line condition is poor.
Assumed cause
DCN signal is received at
phase B during reception.
Line condition is poor.
(Own machine)
7-517
Measures
Request resending.
Change the reception speed
by executing U630 [RX
Speed].
Measures
Extend T2 time-out time in
U641 [T2 TIME OUT].
(Change from the initial set-
ting 69 to 150.)
Set the corrective measures
for echoes at the reception in
U630 [RX Echo]. (Initial set-
ting: 75)
Change the reception starting
speed to "9600bps" or less.
Measures
Request resending.
Change the reception speed
by executing U630 [RX
Speed].
2WA/2NJ/2RK
Reference
U630 Exe-
cution
Reference
U641 Exe-
cution
U630 Exe-
cution
U630 Exe-
cution
Reference
U630 Exe-
cution