Kyocera TASKalfa 7002i Service Manual page 663

U099 Original size detection setting
(Message: Set Original Size Detection)
Description
Sets the operation check of the original size detection and detection threshold
Purpose
Changes the detection threshold if the original size is often mis-detected with entirely dark origi-
nals (high density) and the only edge dark originals.
Setting
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Data1
B/W Level1
Data2
Execution: Data1/Data2
1.Place an original copy on the table, close the original copy cover or document processor.
2.The light source is turned on and the CCD sensor detects the original width. The original size
sensor(OSS) judges the original lengthwise. (Detect twice when the document processor is
installed)
Items
Original Area(dot)
Original Area(mm)
Size SW L
Display of the original width of RGB each three color
Original size detection threshold setting
Display of the original width of RGB each three color (when the docu-
ment processor is installed)
Detected number of pixels (dot) in the original width
Detected the original width (mm)
ON/OFF display of the original length sensor (0: Off/1: On)
6-70
Contents
Contents
2WA/2NJ/2RK-1