Kyocera TASKalfa 7002i Service Manual page 760

U404 Adjusting margins for scanning an original from the docu-
ment processor
(Message: Adjust Scanning Margin(DP))
Contents
Adjusts the margins for DP scanning.
Purpose
Make the adjustment if margins are incorrect
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original on the DP and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
5.Select the item to adjust.
Items
A Margin
B Margin
C Margin
D Margin
A Margin(Back)
B Margin(Back)
C Margin(Back)
D Margin(Back)
6.Change the setting value by using [+] [-] key or the numeric keypad.
* :When the setting value is increased, the margin widens, and it narrows when the setting
value is decreased.
7.Press the [Start] key to set the setting value.
Contents
Adjusts the DP left margin
Adjusts the DP leading edge margin
Sets the DP right margin
Adjusts the DP trailing edge margin
Adjusts the DP left margin (2nd side)
Adjusts the DP leading edge margin
(2nd side)
Adjusts the DP right margin (2nd side)
Adjusts the DP trailing edge margin
(2nd side)
Leading edge margin
(4.0 +1.5/-0 mm)
Left margin
(4.0 mm or less)
Trailing edge margin
(2.5 +1.0/-1.0 mm)
Figure 6-22
Right margin
(4.0 mm or less)
6-167
2WA/2NJ/2RK-2
Setting Data
range varia-
tion
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
0.0 to 10.0 0.5mm
Initial
setting
3.0
2.5
3.0
4.0
3.0
2.5
3.0
4.0