Kyocera TASKalfa 7002i Service Manual page 770

Codes
17 Service call error
18 DP paper jam error
19 PWB replacement error
1a Original error
1b Input gamma adjustment original error
1c Matrix adjustment original error
1d Original for the white Refer ence correction
coefficient error
1e Lab value detection error
1f Lab value comparison error
20 Input gamma correction coefficient error
21 Color correction matrix coefficient error
30 Chromatic aberration adjustment original
error
63 Completed to obtain the test RAW
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
6-177
2WA/2NJ/2RK-1
Corrective action
Turn the power off and on, and exe-
cute again.
Set the original correctly and exe-
cute again.
-
1. Clean the contact glass and slit
glass.
2. Exchange the adjustment origi-
nal.
Set the original correctly and exe-
cute again.
Check the following and execute
again.
Is the bar code dirty?
Is the original position correct?
Is the bar code position correct?
Check the following and execute
again.
Is the acquired bar code the same?
Is the original position correct?
Is the bar code position correct?
Set the original correctly and exe-
cute again.
-