Kyocera TASKalfa 7002i Service Manual page 666

Setting: Set DC Bias
1.Displays the current setting.
Items
DC1 Bias(K)
DC1 Bias Half(K)
Setting: Adj DC Bias
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
* :When the setting value is increased, the image get thinner, and it gets thicker when the set-
ting value is decreased.
Items
DC2 Bias(K) Black main charge DC bias additional
value (Full speed)
DC2 Bias Black main charge DC bias additional
Half(K)
value (Half speed)
3.Press the [Start] key to set the setting value.
Setting: Set Low Temp
1.Change the setting value by using [+] [-] key or the numeric keypad.
Items
Set Low Set the pre-charge time at power ON.
Temp
2.Press the [Start] key to set the setting value.
Black main charge DC bias correction value (Full speed)
Black main charge DC bias correction value (Half speed)
Contents
Contents
6-73
Contents
Setting range Data
variation
-128 to 127 1V
-128 to 127 1V
Setting range Data
variation
0 to 6
2WA/2NJ/2RK
Initial
setting
0
0
Initial
setting
- 1