Kyocera TASKalfa 7002i Service Manual page 581

(2-4)PF-7130
Parts name
A <Set up>
1 PAPER LINE
B <Paper feed>
1 PULLEY FEED
Paper feed X2
2 PULLEY RETARD
Separation X1
3 PULLEY PICKUP
4 PARTS ROLLER EXIT B SP
5 PARTS ROLLER CONVEYING A
X2
5' PARTS ROLLER CONVEYING SP
6 PARTS ROLLER CONVEYING B
X2
7 PARTS ROLLER ASSIST SP
8 CLUTCH 50 Z35R
X2
*:If replaced at check, return to the original maintenance at the next maintenance. If not replaced at check, check again at the next maintenance.
PM maintenance (x1000 counts)
Parts No.
Set up User call
-------- CH
AD
302N406030 CH CH
2N406030 CL RE
302N406040 CH CH
2N406040 CL RE
302N406030 CH CH
2N406030 CL RE
303NL94030 CL
3NL94030
303NL94040 CL
3NL94040
303S094030 CL
3S094030
303NL94050 CL
3NL94050
303NJ94050 CL
3NJ94050
302NH44090 CH CH
2NH44090 RE
CH:Check / CL:Clean / AD:Adjust / LU:Lubrication / RE:Replace
*Based on the main
* Please do not use spray containing flammable gas for air-blow or air-brush purposes.
installation
CH: Check the image center alignment gap
(Check after the center adjustment of copier.)
CL: Alcohol or dry cloth (If no replacement)
CH: Check feeding count in simulation: Target to replace at 300K.
CL: Alcohol or dry cloth (If no replacement)
CH: Check feeding count in simulation: Target to replace at 300K.
CL: Alcohol or dry cloth (If no replacement)
CH: Check feeding count in simulation: Target to replace at 300K.
CL: Alcohol or dry cloth
CL: Alcohol or dry cloth
CL: Alcohol or dry cloth
CL: Alcohol or dry cloth
CL: Alcohol or dry cloth
CH: Check the paper feed status, abnormal sound etc.
4-253
2WA/2NJ/2RK
Remark