Kyocera TASKalfa 7002i Service Manual page 685

U140 Developer bias adjustment
(Message: Adjust Developing Bias)
Contents
Displays/changes the developer bias set values or sets high altitude mode.
Purpose
Execute to check/change the developer bias set values.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Sleeve DC
Sleeve AC
Mag DC
Mag AC
Sleeve Freq
Sleeve Duty
Mag Duty
AC Calib
Image Preference
Lead Density
Setting: Sleeve DC
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
K
3.Press the [Start] key to set the setting value.
Setting: Sleeve AC
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
Items
K
3.Press the [Start] key to set the setting value.
Set the developer sleeve roller DC bias.
Set the developer sleeve roller AC bias.
Set the developer magnet roller DC bias.
Set the developer magnet roller AC bias.
Set the developer sleeve roller frequency.
Set the developer sleeve roller duty.
Set the developer magnet roller duty.
Execute and set AC Calibration
Sets the toner density
Fuser separation failure measure setting
Contents
Black developer sleeve DC bias setting
Contents
Black developer sleeve AC bias setting
Contents
Setting range
0 to 255
Setting range
0 to 255
6-92
2WA/2NJ/2RK
Data Initial
variation setting
- 82
Data Initial
variation setting
- 151