Kyocera TASKalfa 7002i Service Manual page 729

U246 Finisher adjustment
(Message: Adjust Finisher)
Contents
Execute adjustment for the finisher installation.
Purpose
Punch registration stop timing adjustment in the punch mode.
Adjust if paper skews or is folded in A z-shape in the punch mode.
Punch position stop timing adjustment in the punch mode.
Adjust if the punch hole position is not as specified in the punch mode.
Punch center position timing adjustment in the punch mode.
Adjust the punch center position if it is shifted in the punch mode.
Front/rear width adjuster home position adjustment
Adjust when the consistency of the side registration guides and paper is not good and paper
jam occurs.
Adjustment of front/rear shift home position
Execute when alignment is lost with the ejected paper
Front/rear staple home position adjustment
Adjust if the staple is not centered on the paper in the staple mode.
Adjustment of upper/lower side registration home position
Adjust when the consistency of the side registration guides and paper is not good and paper
jam occurs.
Adjustment of booklet stapling position
Adjusts the booklet stapling position in the stitching mode if the position is not proper.
Adjustment of center folding position
Adjusts the center folding position in the stitching mode if the position is not proper.
Adjustment of tri- folding position
Adjusts the tri-folding position in the stitching mode if the position is not proper.
Setting
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Finisher
Booklet
Setting the finisher adjustment value
Adjustment of center-folding unit
6-136
Contents
2WA/2NJ/2RK