Kyocera TASKalfa 7002i Service Manual page 706

Multi Tap Check
1. Select [Multi Tap Check] and press the
[Start] key.
2.Press 2 points of [
(Step1)
* :Displays the detected point with a red dot
if it is out of the default value.
* :When out of the specified value, select
[Initialize] and press the [Start] key and
then return to Step.1.
3.Press 2 points of [
(Step2)
* :[Completed] appears in Step1 and Step2 if
it is within the default value.
4.[Multi Tap Check completed.] appears when
the setting is complete.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
] simultaneously.
] simultaneously.
6-113
Initialize
Multi tap Check. Step1.
Press both circles. Finalize with both pressed at the same time.
*Press with the tips of your fingers. (NOT your fingenails)
Initialize
Multi tap Check. Step1.
Press both circles. Finalize with both pressed at the same time.
*Press with the tips of your fingers. (NOT your fingenails)
Multi Tap Check completed.
Press the Stopkey.
The screen for selecting a maintenace item No. is displayed.
2WA/2NJ/2RK
Step 1 : Not completed.
Step 2 : Not completed.
Step 1 : Not completed.
Step 2 : Not completed.
Step 1 : Completed.
Step 2 : Completed.