Kyocera TASKalfa 7002i Service Manual page 452

(4-2) Detaching and reattaching the developer drive motor
Procedures
1. Remove the rear right cover, rear left
cover and rear lower cover. (Refer 1-4-
72)
2. Disconnect the connector (a).
3. Remove two screws (b)(M4x8) and
remove the developer drive unit (c).
4. Check or replace the developer drive
unit (c) and then reattach the parts in
the original position.
c
a
b
Figure 4-186
4-124
2WA/2NJ/2RK
14j0604