Kyocera TASKalfa 7002i Service Manual page 987

Step Check description
10 Replacing the relay PWB
11 Replacing the feed PWB
12 Replacing the engine PWB The engine PWB is faulty.
J0516/J0517: Multi-feeding from the paper feeder
Object: Paper feeder
The PF feed sensor does not turn off when passing the certain time after the PF feed sensor turns on during
paper feed from the Paper Feeder (cassette 6, 7).
Step Check description
1 Checking the paper
2 Checking the paper
3 Checking the paper
4 Setting the PF cassette
heater
5 Checking the retard pulley
6 Checking the PF retard
spring
7 Checking the installation
8 Checking the connection
Assumed cause
The relay PWB is faulty.
The feed PWB is faulty.
Assumed cause
The cut-end of the paper is
crushed.
The paper leading edge is
bent.
foreign objects are on the
paper.
The paper is damp.
The paper separation force
of the retard pulley is not
enough.
The PF retard spring
comes off.
No grounding between the
main unit and the side
multi feeder.
It is not properly connected
to the main unit.
7-127
Measures
Replace the relay PWB.
Replace the feed PWB.
Replace the engine PWB.
Measures
Fan the paper well and load it
by reversing the paper direc-
tion
Remove the bent paper.
Remove the paper with for-
eign objects.
Replace the paper. Install the
PF cassette heater and set it
at U327 if necessary. And
please instruct user to store
the paper that has less mois-
ture. Store the dry paper in
the plastic bag and seal it to
prevent moisture.
Clean the retard pulley sur-
face. If it is worn down,
replace it.
Reattach the PF retard
spring.
Attach the rails of the side
multi feeder to the main unit.
Reconnect the cable of the
side multi feeder to the main
unit.
2WA/2NJ/2RK
Reference
Detaching
and Reat-
taching the
engine
PWB
Reference
Installing
the PF
cassette
heater
(Paper
feeder)
Detaching
and reat-
taching the
pickup pul-
ley, feed
pulley and
retard pul-
ley
Side Multi
Feeder
Installa-
tion Guide