Kyocera TASKalfa 7002i Service Manual page 951

(3) Jam Codes
Error code
J0000
J0100/J0101/J0102/
J0103/J0104/J0106/
J0108/0200
J0107
J0110/J0112/J0113/
J0114/J0115/J0210
J0131
J0132
J0211/J0212/J0214
J0213
J0215
J0300
J0501/J0502/J0506/
J0507/J0523/J0524/
J0525/J0526/J0527
J0501/J0502
J0501/J0502
J0501/J0502
J0523/J0524
Contents
Power ON jam
Paper jam caused by the pro-
cess time time-out
Paper jam detection caused
by fuser temperature stabiliza-
tion time-out
Cover open detection
MP lift sensor upper limit
detection
Rotary decurler guide error
PF conveying cover / PF top
cover open detection (Side
multi feeder), PF conveying
cover open detection (Paper
feeder / Large capacity
feeder)
Side feeder release detection Object: Side feeder
Side multi feeder release
detection
Paper eject completion non-
detection jam
No paper feed
No paper feed from the cas-
sette
No paper feed from the cas-
sette
No paper feed from the cas-
sette
No paper feed from the large
capacity paper feeder
J0100: Secondary feed, J0101: Imaging process,
J0102: Toner supply, J0103: Image consistency,
J0104: Paper conveying, J0106: Duplex feed,
J0108: Option, J0200: Main unit sequence
J0110: Paper conveying unit open detection
(Conveying unit switch), J0112: Duplex cover
open detection (Duplex cover switch), J0113:
Paper conveying cover open detection (Paper
conveying cover open / close switch), J0114: BR
conveying unit open detection (BR conveying unit
switch), J0115: BR eject cover open detection
(BR eject cover switch), J0210: PF paper convey-
ing cover open detection (PF conveying cover
open / close switch)
Object: Side multi feeder + Paper feeder, or Side
multi feeder + Large capacity feeder
Object: Side multi feeder
Object: 4000-sheet finisher
Prior checking item when no paper feed occurs.
Condition: the paper does not reach the feed pul-
ley.
Condition: The paper stops at the feed pulley.
Condition: The paper leading edge passes the
feed pulley.
7-91
2WA/2NJ/2RK
note