Kyocera TASKalfa 7002i Service Manual page 660

U089 MIP-PG pattern output
(Message: Output MIP-PG Pattern)
Contents
Select and output the MIP-PG pattern generated by the main unit.
Purpose
When adjusting the image scanning items, execute to check the machine status except the scan-
ner section using the MIP-PG pattern output without image scanning process.
* :Test sample which is output in the maintenance mode is not counted both coverage rate and
the number of sheet in the print coverage on service status page.
Execution
1.Press the [Start] key.
2.Select the MIP-PG pattern to output
Gray scale
Mono 1
Mono 4
256Gradation
Sample Set
3.Press the [System Menu] key.
4.Press the [Start] key to output a MIP-PG pattern.
5.Press the [System Menu] key.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Display
Gray scale pattern PG
PG for gray confirmation(Density:0)
PG for gray confirmation(Den-
sity:7.0)
256 steps PG
Gray scale pattern PG
PG for gray confirmation(Den-
sity:7.0)
Output contents
6-67
2WA/2NJ/2RK
Purpose
Check the gradation repro-
ducibility
Check the drum quality
Check the drum quality
Check the gradation repro-
ducibility
Outputs patterns for the long
life unit warranty application