Kyocera TASKalfa 7002i Service Manual page 461

Detaching the feed drive unit
Procedures
1. Remove the rear left cover, rear right
cover and rear lower cover.
2. Pull out the conveying unit.
3. Release two hooks using a flat blade
screwdriver (a) and then remove the
interface cover (b).
4. Remove five screws (d)(M4x8) of the
right lower rear cover (c).
5. Remove the right lower rear cover (c).
6. Remove two screws (a)(M4x8) and
remove the inlet unit (b).
Figure 4-197
b
a
a
Figure 4-198
4-133
2WA/2NJ/2RK
b
d
c
d
14j0209
14j0270
a
b