Kyocera TASKalfa 7002i Service Manual page 1359

Step Check description
5 Checking the destination
unit
6 Checking the setting in the
destination unit
7 Checking the sending con-
tent
(1-11) The beep sounds when the copying or printing is finished.
Step Check description
1 Firmware Update
(1-12) When the data of the A3 or B4 size originals is transmitted, all of it is
transmitted as the A4 size data.
Step Check description
1 Checking the settings
2 Checking the settings
(2) Communication Errors
Error codes are listed on the communication reports, activity report, etc. The codes consist of an error
code indication U followed by a 5-digit number. (The V.34 error is indicated with E of the error code and 5-
digit number)
Regarding the 5-digit number, upper 3 digits indicate error and large classification of cause, lower 2 digits
small classification of cause. The lower 2 digits are 00 for the item not requiring the category.
Assumed cause
The modular cable is dis-
connected in the destina-
tion unit if the destination
unit does not receive the
calling.
The manual reception is
set in the destination unit if
the destination unit does
not receive the calling.
When transmitting the data
to the other country, the
communication line is
automatically cut.
Assumed cause
The firmware is not the lat-
est version.
Assumed cause
The receivable size in the
destination unit is A4 / Let-
ter.
The receivable size in the
destination unit is A4 / Let-
ter.
7-499
Measures
Request the destination unit
to reconnect the modular
cable.
Ask the destination unit to
change the reception set-
tings.
Input a pause at the last of
the destination FAX number.
Measures
Upgrade the fax firmware to
the latest version.
Measures
Select [B4] or [A3/Ledger]
according to the receivable
size at the Address book reg-
istration display > [i-FAX] >
[Paper size].
Select the condition of the
destination unit when trans-
mitting the data, choose [B4]
or [A3/Ledger] according to
the receivable sizes.
2WA/2NJ/2RK
Reference
Reference
Firmware
Update
Reference