Kyocera TASKalfa 7002i Service Manual page 485

17. Remove one wire holder (a).
18. Release one wire saddle (b).
19. Disconnect two connectors (d) from the
IH PWB (c) according to the following
notes.
*: Confirm the power plug is removed
from the outlet when you remove the
connector, because a high current is
supplied to the IH unit by this connector.
*: Confirm the connected connector was
surely locked when you connect this
connector again.
a
Figure 4-234
4-157
2WA/2NJ/2RK
c
d
b
c
14j0306