Kyocera TASKalfa 7002i Service Manual page 616

U001 Exiting the maintenance mode
(Message:Exit Maintenance Mode)
Contents
Exits the maintenance mode and returns to the normal copy mode.
Purpose
Exit the maintenance mode.
Method
1.Press the [Start] key.
2.The normal copy mode is entered.
U002 Set Factory Default
(Message: Set Factory Default)
Contents
Sets the machine initial setting values to the factory default.
Purpose
Executes the machine initial settings when shipping from factory.
Method
1.Press the [Start] key.
2.Select [Mode1(All)].
3.Press the [Start] key.
Items
Mode1(All)
4.Turn the power switch off.
* :An error code is displayed in case of the initialization error.
When errors occur, turn the power switch off then on, and execute initialization using mainte-
nance mode U002.
Wait more than 5 seconds between the power off and on.
Error codes
Codes
0001
0002
0003
0020
0040
Sets the machine initial setting values to the factory default.
Controller (Entity error)
Controller (Counter error)
Controller (OS error)
Engine error
Scanner error
6-23
Contents
Contents
2WA/2NJ/2RK